sail previous year exam papers,sail chemical engineering exam papers,sail latest exam papers,

Steel Authority Of India Limited

Management Trainee

SAIL Chemical Engineering Papers

Q.1.Loss of heat from unlagged steam pipe to the ambient air is by

• conduction
• convection
• radiation
• all the above

Q.2.Fourier's law applies to the heat transfer by

• convection
• radiation
• conduction
• all the above

Q.3.Fourier's law of heat conduction applies to .......... surfaces.

• isothermal
• non-isothermal
• both the above
• none of the above

Q.4.Unsteady state heat conduction occurs, when

• temperature distribution is independent of time
• temperature distribution is dependent on time
• heat flows in one direction only
• three dimensional heat flow is concerned

Q.5.What is the unit of thermal conductivity ?

• Kcal/hr.m2 0C
• Kcal/hr.m. 0C
• Kcal/hr.m
• Kcal/hr.0C

Q.6.The unit of heat transfer co-efficient is

• BTU/hr.ft2 0F
• BTU/hr.0F.ft.
• BTU/hr.0F
• BTU/hr.ft

Q.7.Which of the following is correct ?

• Rate = Driving force * Resistance
• Driving force = Rate * Resistance
• Resistance = Driving force * Rate
• Rate = Resistance/Driving force

 Q.8.An insulator should have

• low thermal conductivity
• high thermal conductivity
• less resistance to heat flow
• a porous structure

Q.9.Heat flux through several resistance in series in analogous to the current flowing through several

• resistances in parallel
• capacitors in series
• resistances in series
• none of these

Q.10.The overall resistance for heat transfer through a series of flat resistance, is the ..... of the resistances.

• average
• geometric mean
• product
• sum

Q.11.Which of the following has the highest thermal conductivity ?

• Brick
• Air
• Water
• Silver

Q.12.Which area is used in case of heat flow by conduction through a cylinder ?

• Logarithmic mean area
• Arithmetic mean area
• Geometric mean area
• None of these

Q.13.For heat flow through very thick walled cylinder, use ............ mean radius.

• arithmetic
• logarithmic
• geometric
• none of these

Q.14.What is the logarithmic mean of r1 and r2 ?

• r1 - r2/ln r1/r2
• r1 - r2/ln r2/r1
• r2 - r1/ln r1/r2
• r1 - r2/ - ln r1/r2

Q.15.What is Nusselt number ?

• Cp.μ/k
• hD/k   
• h.Cp/μ
• Cp.μ/h

Q.16.Prandtl number is given by

• Cp.μ/a
• hD/k
• Cp.μ/k
• μ/h.Cp

Q.17.Thermal diffusivity is given by

• k/r.Cp
• r.Cp/k
• Cp.μ/a
• μ/hCp

Q.18.Grashhoff number is given by

• g D3. β .∆ tr2/μ2 
• g D2β∆tr/μ2
• g D2β∆tr2μ
• g D3β∆tr2/μ

Q.19.If h1 = inner film co-efficient and h2 = outer film co-efficient, then the overall heat transfer co-efficient is

• always less than h1
• always between h1 and h2
• always higher than h2
• dependent on metal resistance

Q.20.Gratez number is give by

• mCp/kL
• kL/mCp
• mCp/kμ
• kL/mCp

Q.21.In the equation Q= UA ∆t ; ∆t is

• geometric mean temperature difference.
• arithmetic mean temperature difference.
• logarithmic mean temperature difference.
• the difference of average bulk temperatures of hot and cold fluids.

Q.22.Peclet number (Pe) is given by

• Pe = Re.Pr
• Pe = Re/Pr
• Pe = Pr/Re
• Pe = Nu.Re

Q.23.Prandtl number is the reciprocal of

• Thermal diffusivity/ Momentum diffusivity
• thermal diffusivity x Momentum
• Thermal diffusivity x Mass diffusivity
• Mass diffusivity x Momentum diffusivity

Q.24.Maximum heat transfer rate is obtained in .......... flow.

• laminar
• turbulent
• creeping
• transition region

Q.25.Heat flux is the time rate of heat transfer per unit

• length
• area
• volume
• none of these

META TAGS:-SAIL PREVIOUS YEAR EXAM PAPERS I DOWNLOAD SAIL MODEL EXAM PAPERS I SAIL LAST 15 YEARS EXAM PAPERS I SAIL SAMPLE PAPERS I SAIL CHEMICAL ENGINEERING EXAM PAPERS I DOWNLOAD SAIL STUDY MATERIALS I SAIL CHEMICAL ENGINEERING SAMPLE PAPERS I DOWNLOAD SAIL MODEL PAPERS I SAIL LAST 10 YEARS EXAM PAPERS I SAIL QUESTION PAPERS I SAIL PAST 5 YEARS EXAM PAPERS I DOWNLOAD SAIL 10 YEARS SOLVED PAPERS I SAIL MODEL TEST PAPERS I DOWNLOAD SAIL STUDY MATERIALS I SAIL PRACTICE PAPERS I SAIL MODEL EXAM PAPERS I DOWNLOAD SAIL LATEST EXAM PAPERS I DOWNLOAD SAIL MECHANICAL ENGINEERING EXAM PAPERS I

Read More

SAIL EXAM PAPERS I SAIL PREVIOUS YEAR EXAM PAPERS I DOWNLOAD SAIL OLD EXAM PAPERS I SAIL ELECTRONICS SAMPLE PAPERS I SAIL ELECTRONICS MODEL PAPERS I

STEEL AUTHORITY OF INDIA LIMITED

SAIL Management Trainee

Electronics & Communication Model Paper

Q.1. To neglect a voltage source, the terminals across the source are

• open circuited
• short circuited 
• replaced by some resistance
• replaced by an inductor

Q.2.Current I0 in the given circuit will be

• 10 A
• 3.33 A
• 20 A
• 2.5 A

Q.3. In a resonant circuit, the power factor at resonance is

• zero
• unity
• 0.5
• 1.5

Q.4.In the given circuit voltage V is reduced to half. The current will become

• I/2
• 2 I
• 1.5 I
• I / √R2 + (XL + XC)2

Q.5.The function          3 s           has
                        (s + 1) (s + 2)

• one zero, two poles
• no zero, one pole
• no zero, two poles
• one zero, no pole

Q.6.One electron volt is equivalent to

• 1.6 * 10-10 J
• 1.6 * 10-13 J
• 1.6 * 10-16 J
• 1.6 * 10-19 J    (Ans)

Q.7.Which of the following is donor impurity element ?

• Aluminium
• Boron
• Phosphorous
• Indium.

Q.8.The diameter of an atom is of the order

• 10-6 m
• 10-10 m
• 10-15 m
• 10-21 m

Q.9.The following Figure represents

• LED
• Varistor
• SCR
• Diac

Q.10.If the d.c. valve of a rectified output is 300 V & peak to peak ripple voltage is 10 V, the ripple factor is

• 1.18%
• 3.33%
• 3.36%
• 6.66%

Q.11.Full wave rectifier output has ripple factor of

• 1.11
• 1.21
• 1.41
• 1.51

Q.12.In a common base connection IE = 2 mA, IC = 1.9 mA. The value of base current is

• 0.1 m
• 0.2 mA
• 0.3 mA
• zero

Q.13.For the action of transistor the base region must be

• P-type material
• N-type material
• very narrow
• highly doped

Q.14.Compared to a CB amplifier the CE amplifier has higher

• current amplification
• output dynamic resistance
• leakage current
• input dynamic resistance
• all of the above 

Q.15.When a transistor is biased to cut-off its Y is

• 0.5
• 0
• 1.0
• 0.8

Q.16.The number of digits in octal system is?

• 8
• 7
• 8 or 7
• 10

Q.17.The number of digits in hexadecimal system is?

• 15
• 10
• 16
• 8

Q.18.The number of bits in a nibble is?

• 8
• 2
• 4
• 16

Q.19.The digit F in hexadecimal system is equivalent to number...........in decimal system?

• 16
• 15
• 17
• 8

Q.20.Which of the following binary number is equivalent to BCD?

• 1010
• 1000
• 1001
• None of these

META TAGS:-SAIL PREVIOUS YEAR EXAM PAPERS I SAIL LAST 5 YEARS SOLVED PAPERS I SAIL ELECTRONICS AND COMMUNICATION EXAM PAPERS I SAIL ELECTRONICS SAMPLE PAPERS I SAIL ELECTRONICS AND COMMUNICATION MODEL EXAM PAPERS I SAIL MANAGEMENT TRAINEE QUESTION PAPERS I DOWNLOAD SAIL EXAM PAPERS IN PDF I SAIL SOLVED EXAM PAPERS I SAIL OLD YEAR EXAM PAPERS I SAIL OLD QUESTION PAPERS FOR ELECTRONICS I SAIL TEST PAPERS I SAIL ELECTRONICS MODEL PAPERS I DOWNLOAD SAIL TEST PAPERS I SAIL PREVIOUS YEAR SOLVED PAPERS I SAIL LAST 5 YEARS EXAM PAPERS I DOWNLOAD SAIL ELECTRONICS STUDY MATERIALS I SAIL STUDY MATERIALS I DOWNLOAD SAIL STUDY MATERIALS I

Read More