Labels

Showing posts with label BSNL TTA EXAM PAPERS. Show all posts
Showing posts with label BSNL TTA EXAM PAPERS. Show all posts

Wednesday, 22 May 2013

ELECTRONICS STUDY MATERIALS I ELECTRONICS AND COMMUNICATION PAPERS I ELECTRONICS SAMPLE PAPERS I BSNL JTO SAMPLE PAPERS I BSNL TTA SOLVED EXAM PAPERS I

ELECTRONICS & COMMUNICATION
Study Materials MCQ
Various Competitive Examinations
Q.1.Any number with an exponent of zero is equal to:
  • zero
  • one
  • that number
  • ten

Q.2.In the decimal numbering system, what is the MSD?
  • The middle digit of a stream of numbers
  • The digit to the right of the decimal point
  • The last digit on the right
  • The digit with the most weight

Q.3.Which of the following statements does NOT describe an advantage of digital technology?
  • The values may vary over a continuous range.
  • The circuits are less affected by noise.
  • The operation can be programmed.
  • Information storage is easy.

Q.4.The generic array logic (GAL) device is ________.
  • one-time programmable
  • reprogrammable
  • a CMOS device
  • reprogrammable and a CMOS device

Q.5.The range of voltages between VL(max) and VH(min) are ________.
  • unknown
  • unnecessary
  • unacceptable
  • between 2 V and 5 V

Q.6.What is a digital-to-analog converter?
  • It takes the digital information from an audio CD and converts it to a usable form.
  • It allows the use of cheaper analog techniques, which are always simpler.
  • It stores digital data on a hard drive.
  • It converts direct current to alternating current.

Q.7.What are the symbols used to represent digits in the binary number system
  • 0,1
  • 0,1,2
  • 0 through 8
  • 1,2

Q.8.A full subtracter circuit requires ________.
  • two inputs and two outputs
  • two inputs and three outputs
  • three inputs and one output
  • three inputs and two outputs

Q.9.The output of an AND gate is LOW ________.
  • all the time
  • when any input is LOW
  • when any input is HIGH
  • when all inputs are HIGH

Q.10.Give the decimal value of binary 10010.
  • 6
  • 9
  • 18
  • 20

Q.11.A mathematical operation for finding the area under the curve of a graph is called __________.
  • differentiation
  • integration
  • curve averaging
  • linear regression

Q.12.An astable multivibrator is also known as a:
  • one-shot multivibrator
  • free-running multivibrator
  • bistable multivibrator
  • monostable multivibrator

Q.13.A sample-and-hold circuit consists of _________.
  • An op-amp, an analog switch, and an inductor
  • An op-amp, an analog switch, and a capacitor
  • two op-amps, an analog switch, and a variable resistor
  • two op-amps, an analog switch, and a capacitor

Q.14.An example of potential energy is:
  • tea-kettle steam
  • a moving vehicle
  • the sun
  • a battery

Q.15.What is the applied voltage for a series RLC circuit when IT = 3 mA, VL = 30 V, VC = 18 V, and R = 1000 ohms?
  • 3.00 V
  • 12.37 V
  • 34.98 V
  • 48.00 V


META TAGS:-BSNL TTA EXAM PAPERS I BSNL TTA STUDY MATERIALS I BSNL TTA SOLVED EXAM PAPERS I BSNL TTA PREVIOUS YEAR PAPERS I BSNL TTA QUESTION PAPERS I BSNL TTA LAST 5 YEAR EXAM PAPERS I BSNL TTA EXAM PAPERS I IN PDF I DOWNLOAD BSNL TTA EXAM PAPERS I SAIL ELECTRONICS EXAM PAPERS I BHEL ELECTRONICS STUDY MATERIALS I SAIL ELECTRONICS EXAM PAPERS I ELECTRONICS & COMMUNICATION SAMPLE PAPERS I IES ELECTRONICS SAMPLE PAPERS I ELECTRONICS SAMPLE EXAM PAPERS I ELECTRONICS & COMMUNICATION OLD EXAM PAPER I ELECTRONICS & COMMUNICATION STUDY MATERIALS I ELECTRONICS STUDY MATERIALS I

Tuesday, 14 May 2013

BSNL TTA EXAM PAPERS I DOWNLOAD BSNL TTA QUESTION PAPERS I DOWNLOAD BSNL TTA LAST 5 YEAR PAPERS I BSNL TTA PREVIOUS YEAR SOLVED PAPERS I BSNL TTA STUDY MATERIALS I BSNL TTA SOLVED EXAM PAPERS I

BSNL TTA Question 

Instruments and Measurement

Specialization 2007

Q.1.Instrument is a device for determining
  • the magnitude of a quantity
  • the physics of a variable
  • either of the above
  • both (a) and (b)
Q.2.Electronic instruments are preferred because they have
  • no indicating part
  • low resistance in parallel circuit
  • very fast response
  • high resistance in series circuit
  • no passive elements.
Q.3.A DC watt meter essentially consist of
  • two ammeters
  • two voltmeters
  • a voltmeter and an ammeter
  • a current and potential transformer
Q.4.Decibel is a unit of
  • power
  • impedance
  • frequency
  • power ratio
Q.5.A dc voltmeter may be used directly to measure
  • frequency
  • polarity
  • power factor
  • power
Q.6.An accurate voltmeter must have an internal impedance of
  • very low value
  • low value
  • medium value
  • very high value
Q.7.The insulation resistance of a transformer winding can be easily measured with
  • Wheatstone bridge
  • megger
  • Kelvin bridge
  • voltmeter
Q.8.A 100 V voltmeter has full-scale accuracy of 5%. At its reading of 50 V it will give an error of
  • 10%
  • 5%
  • 2.5%
  • 1.25%
Q.9.You are required to check the p. f. of an electric load. No p.f. meter is available. You would use:
  • a watt meter
  • a ammeter, a voltmeter and a watt meter
  • a voltmeter and a ammeter
  • a kWh meter
Q.10.The resistance of a field coil may be correctly measured by using
  • a voltmeter and an ammeter
  • Schering bridge
  • a Kelvin double bridge
  • a Maxwell bridge
Q.11.An analog instrument has output
  • Pulsating in nature
  • Sinusoidal in nature
  • Which is continuous function of time and bears a constant relation to its input
  • Independent of the input quantity
Q.12.Basic charge measuring instrument is
  • Duddel's oscillograph
  • Cathode ray oscillograph
  • Vibration Galvanometer
  • Bailastic Galvanometer
  • Battery Charging equipment
Q.13.A.C. voltage can be measured (using a d.c. instrument) as a value obtained
  • by subtracting the d.c. reading from it's a.c. reading.
  • Using the output function of the multimeter
  • By using a suitable inductor in series with it
  • By using a parallel capacitor with it
  • None of the above
Q.14.A moving coil permanent magnet ammeter can be used to measure
  • D. C. current only
  • A. C. current only
  • A. C. and D. C. currents
  • voltage by incorporating a shunt resistance
  • none of these
Q.15.Select the wrong statement
  • the internal resistance of the voltmeter must be high
  • the internal resistance of ammeter must be low
  • the poor overload capacity is the main disadvantage of hot wires instrument
  • the check continuity with multimeter, the highest range should be used.
  • In moving iron voltmeter, frequency compensation is achieved by connecting a capacitor across its fixed coil.
Q.16.Which of the following instrument is suitable for measuring both a.c. and d.c. quantities.
  • permanent magnet moving coil ammeter.
  • Induction type ammeter.
  • Quadrant electro-meter.
  • Moving iron repulsion type ammeter.
  • Moving iron attraction type voltmeter.
Q.17.Swamping resistance is used in moving coil instruments to reduce error due to
  • thermal EMF
  • temperature
  • power taken by the instrument
  • galvanometer sensitivity.
Q.18.A power factor meter is based on the principle of
  • electrostatic instrument
  • Electrodynamometer instrument
  • Electro thermo type instrument
  • Rectifier type instrument.
Q.19.A potentiometer recorder is used for
  • AC singles
  • DC signals
  • both (a) and (b)
  • time varying signals
  • none of these.
Q.20.Transformers used in conjunction with measuring instruments for measuring purposes are called
  • Measuring transformers
  • transformer meters
  • power transformers
  • instrument transformers
  • pulse transformers.
Q.21.Leakage flux in an electrical machine is measure by
  • Ballistic galvanometer
  • Flux meter
  • Either (a) or (b)
  • Vibration galvanometer
  • CRO
Q.22.A C.R.O. is used to indicate
  • supply waveform
  • magnitude of the applied voltage
  • B.H. loop
  • all of these
  • Magnitude of the current flowing in it.
Q.23.An oscillator is a
  • an amplifier having feedback network
  • a high gain amplifier
  • a wide band amplifier
  • a untuned amplifier
  • None of these
Q.24.Distortion can be measured by
  • Wave meter
  • Digital filters
  • Wein bridge circuit
  • Bridge T filter circuit
Q.25.Series connected Q- meter is preferable for measurement of components having
  • high impedance
  • low impedance
  • both (a) and (b)
  • high frequency
  • low capacitance
Q.26.A potentiometer is
  • an active transducer
  • a passive transducer
  • a secondary transducer
  • a digital transducer
  • a current sensing transducer
Q.27.The basic components of a digital voltmeter are:
  • A/D converter and a counter
  • A/D converted and a rectifier
  • D/A converter and a counter
  • Ramp generator and counter
  • Comparator
Q.28.Which of the following electrical equipment cannot convert ac into dc
  • diode
  • converter
  • transformer
  • mercury arc rectifier
Q.29.Voltage measurement are often taken by using either a voltmeter or
  • an ammeter
  • an ohmmeter
  • an oscillator
  • a watt-meter
Q.30.The electric device which blocks DC but allows AC is called:
  • capacitance
  • inductor
  • an oscilloscope
  • a watt-meter
Q.31.The range of an ammeter can be extended by using a
  • shunt in series
  • shunt in parallel
  • multiplier in series
  • multiplier in parallel
Q.32.A device that changes one form of energy to another is called
  • rheostat
  • oscillator
  • transducer
  • varicap
Q.33.Aquadag is used in CRO to collect
  • primary electron
  • secondary electron
  • both primary and secondary
  • none of above
Q.34.A vertical amplifier for CRO can be designed for
  • only a high gain
  • only a broad bandwidth
  • a constant gain time bandwidth product
  • all of the above
Q.35.One of the following is active transducer
  • Strain gauge
  • Selsyn
  • Photovoltic cell
  • Photo emissive cell
Q.36.The dynamic characteristics of capacitive transducer are similar to those of
  • low pass filter
  • high pass filter
  • band pass filter
  • band stop filter
Q.37.Thermocouples are
  • passive transducers
  • active transducers
  • both active and passive transducers
  • output transducers
Q.38.The size of air cored transducers as compare to iron core counter part are
  • bigger
  • smaller
  • same
  • None of these
Q.39.From the point of view of safety, the resistance of earthing electrode should be:
  • low
  • high
  • medium
  • the value of resistance of electrode does not effect the safety
Q.40.In CRT the focusing anode is located
  • between pre accelerating and accelerating anodes
  • after accelerating anodes
  • before pre accelerating anodes
  • none of above
Q.41.Which transducer converts heat energy into electrical energy
  • I.V.D.T.
  • thermocouple
  • photo-conductor
  • none of the above
Q.42.Which of photoelectric transducer is used for production of electric energy by converting solar energy
  • photo emission cell
  • photo diode
  • photo transistor
  • both (b) and (c)
Q.43.Which of the following instruments consumes maximum power during measurement?
  • induction instruments
  • hot wire instruments
  • thermocouple instruments
  • electro dynamometer instruments
Q.44.Which of the following meters has the best accurancy
  • moving iron meter
  • moving coil meter
  • rectifier type meter
  • thermocouple meter
Q.45.The function of the safety resistor in ohm meter is to
  • limit the current in the coil
  • increase the voltage drop across the coil
  • increase the current in the coil
  • protect the battery
Q.46.Which of the following instruments is free from hysteresis and eddy current losses?
  • M.l. instrument
  • electrostatic instrument
  • electrodynamometer type instrument
  • all of these
Q.47.The dielectric loss of a capacitance can be measured by
  • Wien bridge
  • Owen bridge
  • Schering bridge
  • Maxwell bridge
Q.48.Reed frequency meter is essentially a
  • recording system
  • deflection measuring system
  • vibration measuring system
  • oscillatory measuring system
Q.49.In measurements made using a Q meter,high impedance elements should preferably be connected in
  • star
  • delta
  • series
  • parallel
Q.50.A digital voltmeter measures
  • peak value
  • peak-to-peak value
  • RMS value
  • average value
META TAGS:-TTA SAMPLE EXAM PAPERS I TTA PREVIOUS YEAR SAMPLE PAPERS I TTA PREVIOUS YEAR SOLVED PAPERS I TTA PREVIOUS YEAR QUESTION PAPERS I TTA LAST 5 YEAR SOLVED PAPERS I TTA INSTRUMENT AND MEASUREMENT QUESTION PAPER I TTA I & M SAMPLE PAPERS I BSNL TTA IMPORTANT QUESTIONS I TTA PREVIOUS YEAR SOLVED PAPERS I BSNL TTA STUDY MATERIALS I BSNL TTA LAST 10 YEAR SOLVED PAPERS I BSNL TTA PRACTICE EXAM PAPERS I BSNL TTA GUESS PAPERS I BSNL TTA GUESSING PAPERS I DOWNLOAD BSNL TTA QUESTION PAPERS I BSNL TTA SAMPLE PAPERS I BSNL TTA STUDY MATERIALS I BSNL TTA OLD EXAM PAPERS I

Wednesday, 1 May 2013

BSNL TTA HIMACHAL-PRADESH SYLLABUS I BSNL TTA NEW EXAM SYLLABUS I DOWNLOAD BSNL TTA STATEWISE EXAM SYLLABUS I BSNL TTA COMPLETE SYLLABUS I

BHARAT SANCHAR NIGAM LIMITED

BSNL TTA Exam Syllabus

HIMACHAL-PRADESH CIRCLE

PART-I: GENERAL ABILITY TEST
The candidate’s comprehension & understanding of General English shall be tested through simple exercise such as provision of antonyms and synonyms, fill in the blanks & multiple-choice exercises etc.This shall also include questions on current events, general knowledge and such matters of everyday observation and experience as may be expected of Diploma holder.
PART -II: BASIC ENGINEERING
1. Applied Mathematics: 
  • Co-ordinate Geometry; Vector Algebras, Matrix & Determinant ;Differential calculus ; Integral calculus, Differential equation of second order; Fourier Series; Laplace Transform; Complex Number; Partial Differentiation.
2.Applied Physics: 
  • Measurement-Units & Dimensions; Waves,Acoustics,Ultrasonic;Light; Laser & its Applications; Atomic Structure and Energy Levels.
3. Basic Electricity: 
  • Electrostatics,coulomb’s law,Electric field,Gauss’s theorem,concept of potential difference ;concept of capacitance & capacitors;Ohm‘s law,power energy, Kirchoff’s voltage & current laws & their applications in simple DC circuits; Basic Magnetism; Electro Magnetism; Electromagnetic induction; Concept of alternating voltage & current; cells and Batteries ; Voltage and Current Sources; Thevenin’s theorem, Norton’s theorem and their applications.
4.Electronic Devices and Circuits:
  • Classification of materials into conductor ,semi conductor, insulator etc. electrical properties,magnetic materials,various types of relays,switches & connectors. Conventional representation of electric & electronic circuit elements. Active & Passive components;semi conductors Physics;Semi Conductor Diode; Bipolar Transistor & their circuits; Transistor Biasing & Stabilization of operating point; Single stage transistor amplifier;field effect transistor, Mosfet circuit applications. Multistage Transistor Amplifier; Transistor Audio Power Amplifiers; Feedback in Amplifier; Sinusoidal Oscillators; tuned Voltage Amplifier; Opto Electronics Devices & their applications;Operational Amplifier; wave shaping and switching circuits.Block diagram of I.C timer(such as 555) and its working; Multivibrator circuits; Time base circuits; Thyristors and UJT; Regulated Power Supply.
5.Digital Techniques: 
  • Applications and advantages of digital systems; number system(binary & hexadecimal); Logic Gates; Logic Simplification; Codes and Parity; Arithmetic Circuits; Decoders. Display Devices and Associated Circuits; Multiplexers and De-multiplexers; Latches and Flip Flops; Counters; Shift Register; Memories; A/D and D/A converters.
PART-III: SPECIALIZATION
1.Electrical Engineering: 
  • 3 phase vs single phase supply, Star Delta Connections, relation between phase & line voltage, power factor and their measurements; construction and principles of working of various types of electrical measuring instruments, all types of motor and generator-AC & DC transformers, starters, rectifiers, invertors, battery charges, batteries, servo & stepper motors, contactor control circuits, switch gear, relays, protection devices & schemes, substation,protection relaying,circuit breaker,generator protection, transformer protection, feeder & lightening protection,feeder & bus bar protection, lightening arrestor, earthing, voltage stabilizer & regulators, power control devices & circuits, phase controlled rectifiers, invertors, choppers, dual converters, cyclo converters; power electronics application in control of drivers, refrigeration & air conditioning.
2.Communication: 
  • Modulation & demodulations-principles & operation of various types of AM, FM and PM modulators/demodulators; pulse modulation-TDM,PAM,PPM,PWM; Multiplexing, Principles and applications of PCM.Introduction of Basic block diagram of digital and data communication system; coding error detection and correction techniques; Digital Modulation Techniques-ASK,ICW, FSK, SK; Characteristics/ working of data transmission circuits; UART,USART; Modems; Protocols and their functions, brief idea of ISDN interfaces, local area Network; Carrier telephony-Features of carrier telephone system. Microwave Engineering; Microwave Devices; Waveguides; Microwave Components; Microwave antennas; Microwave Communication System-Block diagram & working principles of microwave communication link.
3.Network, Filters and Transmission Lines: 
  • Two point network,Attenuator;Filters; Transmission Lines and their applications; characteristic impedance of line; concept of reflection and standing waves on transmission line; Transmission line equation; Principle of impedance matching; Bandwidth consideration of transmission line.
4.Instruments and Measurements: 
  • Specification of instruments-accuracy, precision, sensitivity, resolution range. Error in measurement and loading effect; Principles of voltage, current and resistance measurement; Transducers, measurement of displacement & strain, force & torque measuring devices, flow of measuring devices, power control devices & circuits. Types of AC milli voltmeters-Amplifier rectifier amplifier: Block diagram explanation of a basic CRO & a triggered sweep oscilloscope, front panel controls; Impedance Bridges & Q-Meters. Principles of working & specification of logic probes, signal analyzer and logic analyzer, signal generator, distortion factor meter, spectrum analyzer.
5.Control Systems: 
  • Basic elements of control system ,open & closed loop system, concepts of feedback. Block diagram of control system, Time lag,hysterisis linearity concepts; Self regulating & non self regulating control systems.Transfer function of simple control components, single feedback configuration. Time response of systems.Stability Analysis; Characteristics equation. Routh’s table, Nyquist Criterion, Relative stability, phase margin and gain margin.Routh Harwitz criterion; Root Locus technique, Bode plot, Power plot, gain margin and phase margin.
6.Microprocessors: 
  • Typical organization of microcomputer system & functions of its various blocks, Architecture of a Microprocessor; Memories and I/O Interfacing; Brief idea of M/C & assembly languages,Machines and Mnemonic codes; Instructions format and Addressing mode; concept Instruction set; programming exercises in assembly language; concept of interrupt; Data transfer  techniques-sync data transfer, async data transfer, interrupt driven data transfer,DMA, serial output data, serial input data.
7.Computer: 
  • Computers & its working,types of computers,familiarization with DOS & windowconcept of file, directory, folder, Number Systems; Data Communication. Programming-Elements of a high level programming language,PASCAL,C;use of basic data structures; Fundamentals of computer architecture, Processor design, control unit design; Memory organization. I/O System Organization. Microprocessor-microprocessor architecture, instruction set and simple assembly level programming. Microprocessor based system design: typical examples. Personal computers & their typical uses, data communication principles, types and working principles of modems,Network principles, OSI model, functions of data link layer and network layer, networking components; communication protocol-x.25, TCP/IP. 
8.Database Management System:
  • basic concepts, entity relationship model, relational model, DBMS based on relational model.
META TAGS:-BSNL TTA EXAM SYLLABUS I BSNL TELECOM TECHNICAL ASSISTANT EXAM SYLLABUS I TTA COMPLETE EXAM SYLLABUS I BSNL TTA QUESTION PAPERS I TTA LATEST EXAM SYLLABUS I TTA ENGINEERING SYLLABUS I TTA GENERAL ABILITY EXAM SYLLABUS I TTA GENERAL ENGINEERING EXAM SYLLABUS I TTA LATEST EXAM SYLLABUS I TTA COMPLETE SYLLABUS I TTA COMPUTER SYLLABUS I TTA ELECTRONICS SYLLABUS I TTA ELECTRICAL ENGINEERING SYLLABUS I TTA COMMUNICATION SYLLABUS I TTA DIGITAL ELECTRONICS EXAM SYLLABUS I TTA CONTROL SYSTEM EXAM SYLLABUS I TTA HIMACHAL-PRADESH CIRCLE EXAM SYLLABUS I TTA COMPLETE PREPARATION KIT I TTA PREPARATION TIPS I

Tuesday, 23 April 2013

TTA EXAMPAPERS I TTA PREVIOUS YEAR PAPERS I TTA QUESTION PAPERS I TTA LAST YEAR PAPERS I TTA SOLVED EXAM PAPERS I TTA TEST PAPERS I TTA PRACTICE PAPERS I

BHARAT SANCHAR NIGAM LIMITED (BSNL)
TELECOM TECHNICAL ASSISTANT 
BSNL TTA Model Paper
  • BSNL Telecom Technical Assistant Exam Model Paper-11
  • BSNL Telecom Technical Assistant Exam Model Paper-12
  • BSNL Telecom Technical Assistant Exam Model Paper-13
  • BSNL Telecom Technical Assistant Exam Model Paper-14
  • BSNL Telecom Technical Assistant Exam Model Paper-15
META TAGS:- TTA EXAM PAPERS I DOWNLOAD TTA EXAM PAPERS I TTA SOLVED PAPERS I TTA LAST 5 YEAR PAPERS I TTA PRACTICEPAPERS I TTA QUESTION PAPERS I TTA PREVIOUS YEAR PAPERS I TTA SELECTION PAPERS I TTA STUDY MATERIALS I TTA STUDY NOTES I BSNL JTO SOLVED PAPERS I TTA COMPLTE SOLVED PAPERS I TTA GENERAL AWARENESS SOLVED PAPERS I TTA GENERAL ABILITY SOLVED PAPERS I TTA GENERAL ABILITY QUESTION PAPERS I TTA GENERAL ABILITY SAMPLE PAPERS I TTA GENERAL AWARENESS SOLVED PAPERS I TTA GENERAL AWARENESS EXAM PAPERS I

TTA EXAM PAPERS I BSNL TTA SOLVED PAPERS I TTA QUESTION PAPERS I TTA OLD EXAM PAPERS I

BHARAT SANCHAR NIGAM LIMITED (BSNL)

TELECOM TECHNICAL ASSISTANT 

Computer Engineering Model Paper


Q.1.What is the name of the software that allows us to browse through web pages?
  • Browser
  • Mail Client
  • FTP Client
  • Messenger
Q.2.What is the address given to a network called?
  • System Address
  • Sys ID
  • Process ID
  • IP Address
Q.3.Which one of the following is a valid DOS command?
  • LIST *.*
  • LIST???.
  • RECOVER A:
  • RENAME A:SAMPLE.TXT C:TEST.DOC
Q.4.All system settings in WINDOWS are stored in:
  • CONTROL.INI
  • MAIN.INI
  • SYSTEM.INI
  • SETTING.INI
Q.5.Which number system is usually followed in a typical 32-bit computer?
  • 2
  • 10
  • 16
  • 32
Q.6.Which of the following is not an output device:
  • Printer
  • Scanner
  • Flat Screen
  • Touch Screen
Q.7.A microprocessor is a processor with reduced
  • instruction set
  • power requirement
  • MIPS performance
  • none of the above
Q.8.Which of the following is not an output of an assembler?
  • executable program
  • source listing with line numbers and errors
  • a symbol table
  • object program
Q.9.Which layer of OSI model is responsible for routing and flow control:
  • Presentation
  • Transport
  • Network
  • Data Link
Q.10.Arrays are passed as arguments to a function by
  • value
  • reference
  • both a and b
  • none of the above
Q.11.Array is:
  • linear data structure
  • non-linear structure
  • none of the above
  •  
Q.12.A data structure in which elements are added and removed from only one end, is known as:
  • Array
  • Stack
  • Queue
  • None of the above
Q.13.C language is available for which of the following Operating Systems?
  • DOS
  • Windows
  • Unix
  • All of the above
Q.14.A diamond-shaped box in an Entity-Relationship diagram refers to:
  • Entity
  • Relationship
  • Attribute
  •  
Q.15.Which of the following statements in regard to Directories is false?
  • Directories can exist inside directories
  • The root directory is always at the highest level
  • Directories with files can be deleted
  • Directories cannot be renamed
Q.16.The principle means of identifying entities within an entity set is:
  • Primary Key
  • Record
  • Attribute
  • Tuple
Q.17.Modem refers to:
  • Modulator
  • Modulation
  • Demodulator
  • Modulator and Demodulator
Q.18.Which one of the following is not a Normal Forms (Normalization) rule with regards to the
Relational Model?
  • All fields within a table must relate to or directly describe the Primary Key.
  • Repeating Groups must be eliminated from tables.
  • Fields that can contain non-numeric data are to be removed and placed within their own tables with an associated Primary Key.
  • Redundant data is to be eliminated by placing the offending fields in another table.
Q.19.What is a file server?
  • A computer that performs a service for other computers
  • A computer that controls the printers on the network
  • A computer that stores files that are created by network users
  •  
Q.20.If c is a variable initialized to 1, how many times the following loop be executed:
while(c>0 && c<60)
{
c++;
}
  • 59
  • 60
  • 61
  • none of the above
Q.21.Which of the following have the fastest access time?
  • Magnetic Tapes
  • Magnetic Disks
  • Semiconductor Memories
  • Compact Disks
Q.22.DMA stands for:
  • Direct Memory Allocation
  • Distinct Memory Allocation
  • Direct Memory Access
  • Distinct Memory Access
Q.23.It is better to buffer a table when
  • When a table is read infrequently
  • When a table is linked to check tables
  • When a table is read frequently and the data seldom changes
  • When a single record is to be picked up
Q.24.Array subscripts in C always start at:
  • 1
  • 0
  • 1
  • Value provided by user
Q.25.Which type of commands in DOS needs additional files for their execution?
  • Batch Commands
  • Internal Commands
  • External Commands
  •  
Q.26.The Operating System is responsible for:
  • Controlling peripheral devices such as monitor, printers, disk drives
  • Provide an interface that allows users to choose programs to run and to manipulate files
  • Manage users’ files on disk
  • All of the above
Q.27.RAM stands for
  • Read Access Memory
  • Read After Memory
  • Random Access Memory
  • Random After Memory
Q.28.A company whishes to connect two sites in different parts of the country together. It is
decided to use the telephone system. What device should be connected to the fileservers on each site?
  • Router
  • Modem
  • Switch
  • Hub
Q.29.What is the Protocol used for the Internet?
  • IPX/SPX
  • NetBIOS/NetBEUI
  • CDMA/CA
  • TCP/IP
Q.30.A floppy disk is consisting of 40 tracks, each track contains 100 sectors, and the capacity of a sector is 512 bytes, what is the approx. size of that disk?
  • 1 MB
  • 2 MB
  • 4 MB
  • 8 MB
Q.31.Choose the answer which best describes the term Primary Key:
  • The Primary Key is a field that contains data that can be duplicated.
  • The Primary Key is a field that contains data that is unique.
  • The Primary Key is a field that is never associated with any field in other tables.
  • The Primary Key field is a concept used only in Microsoft Access.
Q.32.Which technique is used to reduce the size of a file:
  • Compression
  • Decompression
  • Encryption
  • Decryption
Q.33.BIOS stands for
  • Binary Input Output Set
  • Binary Input Output System
  • Basic Input Output Set
  • Basic Input Output System
Q.34.What is the binary equivalent of a decimal number 68:
  • 1000100
  • 1100100
  • 1000010
  • 1000001
Q.35.The declaration void fun(int) indicates the fun is a function which:
  • has no arguments
  • returns nothing
  • both a and b
  • none of the above
Q.36.Assembly language to machine language translation is:
  • One-to-One
  • One-to-Many
  • Many-to-One
  • Many-to-Many
Q.37.An RDBMS is a:
  • Remote DBMS
  • Relative DBMS
  • Reliable DBMS
  • Relational DBMS
Q.38.Maximum size of IP address is:
  • 12 bits
  • 24 bits
  • 32 bits
  • 48 bits
Q.39.The overall logical structure of a database can be expressed graphically by:
  • Data Flow Diagram
  • Flow Chart
  • Directed Graph
  • Entity-Relationship Diagram
Q.40.What is the final value of sum?
main ()
{
int sum=1;
for(;sum<=9;)
printf(%d\n, ++sum);
}
  • 9
  • 10
  • 11
  • none of the above
Q.41.Cache memory enhances:
  • memory capacity
  • memory access time
  • secondary storage capacity
  • secondary storage access time
Q.42.Out of the following which is not valid network topology:
  • Bus
  • Star
  • Circle
  • Tree
Q.43.CARRY, in a half-adder, can be obtained using:
  • OR gate
  • AND gate
  • EX-OR gate
  • EX-AND gate
Q.44.The memory that requires refreshing of data is:
  • SROM
  • DROM
  • SRAM
  • DRAM
Q.45.A gigabyte represents:
  • 1 billion bytes
  • 1000 kilobytes
  • 230 bytes
  • 10 megabytes
Q.46.The minimum number of bits required to represent numbers in the range:28 to +31 is-
  • 5
  • 6
  • 7
  • 8
Q.47.Which bus carries information between processors and peripherals?
  • Data bus
  • Control bus
  • Address bus
  • Information bus
Q.48.Which part of the computer perform arithmetic calculations?
  • Control unit
  • Registers
  • ALU
  • CPU
Q.49.The minimum number of bits required to store the hexadecimal number FF is:
  • 2
  • 4
  • 8
  • 16
Q.50.A UPS:
  • increases the storage capacity of a computer system
  • increases the processor speed
  • provides backup power in the event of a power cut\
  • none of the above
META TAGS:- TTA COMPUTER ENGINEERING SOLVED PAPERS I TTA SAMPLE PAPERS I TTA LAST 5 YEAR PAPERS I TTA QUESTION PAPERS I TTA PREVIOUS YEAR PAPERS I TTA LAST 5 YEAR PAPERS I TTA LAST 10 YEAR PAPERS I TTA PREVIOUS 10 YEAR PAPERS I TTA SAMPLE PAPERS I TTA GUESS PAPERS I TTA GUESSING PAPERS I TT SOLVED PAPERS I TTA STUDY MATERIALS I TTA STUDY NOTES I TTA MODEL PAPERS I TTA UNSOLVED PAPERS I TTA GUESSING PAPERS I TTA PAPERS DOWNLOAD I DIOWNLOAD TTA EXAM PAPERS IN PDF I TTA OLD QUESTION PAPERS I TTA OLD EXAM PAPERRS I