Labels

Showing posts with label TTA ELECTRICAL QUESTION PAPERS. Show all posts
Showing posts with label TTA ELECTRICAL QUESTION PAPERS. Show all posts

Friday, 7 June 2013

BSNL TTA MODEL PAPERS I DOWNLOAD BSNL TTA ELECTRICAL ENGINEERING EXAM PAPERS I BSNL TTA ELECTRICAL MODEL PAPERS I DOWNLOAD BSNL TTA ELECTRICAL OLD EXAM PAPERS I TTA ELECTRICAL LAST 5 YEAR EXAM PAPERS I BSNL TTA ELECTRICAL SOLVED PAPERS I

BHARAT SANCHAR NIGAM LIMITED
BSNL Junior Telecom Officer
Electrical Engineering Exam Paper
Q.1.Two 100-W, 200-V lamps are connected in series across a 200-V supply. The total power consumed by each lamp will be _____ watts.
  • 200
  • 100
  • 50
  • 25
Q.2.Kirchhoff’s voltage law is not valid for a non-linear network.
  • True
  • False
  • Can not determine
  • Partially True
Q.3.The material used for fuse must have
  • low melting point and low specific resistance
  • high melting point and low specific resistance
  • low melting point and high specific resistance
  • none of these
Q.4.If a piece of metal wire is stretched, its resistance will increase.
  • True
  • False
  • Can not determine
  • Partially True
Q.5.The usual value of the surge impedance of a telephone line is ______ohm.
  • 75
  • 600
  • 500
  • 250
Q.6.In mesh analysis of a network,all the mesh currents must necessarily be either clock-wise or anticlock-wise.
  • True
  • False
  • Partially False
  • Partially True
Q.7.The purpose of introducing reactor in the ignition circuit of mercury are rectifier is to limit the
  • voltage of the circuit
  • rate of change of flux in the circuit
  • current in the circuit
  • rate of change of current in the circuit
Q.8.An uncharged capacitor is connected across a charged one.There will flow an impulsive current through the circuit.
  • True
  • False 
  • Partially False
  • Partially True
Q.9.In the case of a lossy capacitor, series equivalent resistance value will be
  • small
  • large
  • very small
  • none of these
Q.10.Time constant of an R-C circuit increases if the value of resistance is
  • decreased
  • increased
  • neither (a) nor (b)
  • either (a) or (b)
Q.11.If R, L and C denote resistance, inductance and capacitance respectively, the quantity RC has the same dimensions as that of R/L.
  • True
  • False
  • Partially False
  • Partially True
Q.12.If R, L and C denote resistance, inductance and capacitance respectively, then the quantity CR2 has the dimensions, of L.
  • True
  • False
  • Partially False
  • Partially True
Q.13.Sparking between contacts can be reduced by inserting a
  • capacitor in parallel with contacts
  • resistance in the line
  • capacitor in series with contacts
  • none of these
Q.14.A battery will not cause any current to flow, when it is connected across a pure capacitor, in the steady state even if the capacitor value varies with time.
  • True
  • False
  • Partially False
  • Partially True
Q.15.Voltage stress is maximum in a cable at the surface of the
  • insulator
  • sheath
  • conductor
  • none of these
Q.16.When two capacitors C1 and C2 are connected in series, the effective capacitance is C1+C2
  • True
  • False
  • Partially False
  • Partially True
Q.17.Sparking occurs when a load is switched off because the circuit has high
  • a resistance
  • inductance
  • capacitance
  • none of these
Q.18.The flux linked with a coil of inductance l carrying a current i is ddt(Li).
  • True
  • False
  • Partially False
  • Partially True
Q.19.The coefficient of coupling between two air core coils depends on
  • mutual inductance and self inductances of the two coils
  • mutual inductance between two coils only
  • self inductances of the two coils only
  • none of these
Q.20.The location of lightning arrestor is
  • away from the transformer
  • near the transformer
  • near the circuit breaker
  • none of these
Q.21.A conductor of length 1 meter moves at rt. angles to a magnetic field of flux density 1 Wb/m2 with a velocity of 25 m/s. The induced e.m.f. in the conductor will be ----- volt.
  • 75
  • 25
  • 50
  • 100
Q.22.In electrical machines, laminated cores are used with a view to reducing
  • eddy current loss
  • hysteresis loss
  •  
Q.23.A battery
  • always delivers power
  • always absorbs power
  • absorbs power when the internal resistance is non-zero but delivers power when the internal resistance is zero
  • can absorb or deliver power depending upon the circuit to which it is connected
Q.24.When one wants to connect two batteries in parallel to draw larger current than what can be supplied by one battery, it suffices to ensure that their e.m.f.s. are equal.
  • True
  • False
  • Partially True
  • none of these 
25.An ideal battery can supply infinite current
  • True
  • False
  • Partially True
  • none of these
Q.26.Decibel is a
  • unit of voltage
  • unit of power
  • ratio of power
  • none of these
Q.27.dBm is a
  • ratio of power
  • unit of power
  • unit of voltage
  • none of these
Q.28.Decibel is a unit of
  • frequency
  • impedance
  • power ratio
  • none of these
Q.29.The absolute unit of resistance is of the dimension of
  • velocity
  • length
  • acceleration
  • none of these
Q.30.The absolute unit of inductance is of the dimension of
  • time
  • length
  • mass
  • none of these
Q.31.The applied voltage from the circuit being checked is disconnected when an ohmmeter is used because
  • the current will decrease the resistance
  • the ohmmeter has its own battery
  • no current is needed for meter movements
  • none of these
Q.32.An accurate voltmeter must have an internal impedance of
  • very high value
  • very low value
  • low value
  • none of these
Q.33.A moving –coil instrument can be used to measure
  • high frequency a.c.
  • low frequency a.c
  • both d.c. and a.c
  • direct current
Q.34.The voltage drop across the moving coil of a 50-µ A (f.s) PMMC meter at full- scale deflection is ---- the voltage drop across that of a 1-mA (fs) PMMC meter at full-scale deflection.
  • less than
  • approximately equal to
  • greater than
  • none of these
Q.35.Deflection of pointer of a permanent-magnet moving-coil meter for fixed current is _______ flux density in the airgap between magnetic pole shoes and coil.
  • independent of
  • directly proportional to
  • inversely proportional to
  • none of these
Q.36.A moving-iron meter is useful for voltage measurement at _______frequencies.
  • high
  • low
  • very high
  • none of these
Q.37.A thermocouple instruments would be used to measure alternating current only?
  • low
  • very low
  • high
  • none of these
Q.38.Which of the following instruments will be used to measure alternating current only?
  • moving – iron (attraction-types) ammeter
  • moving – iron voltmeter
  • permanent-magnet type ammeter
  • induction-type ammeter
Q.39.A milliammeter can be used
  • only as an ammeter
  • as a voltmeter
  • both as voltmeter and ammeter
  • none of these
Q.40.To measure the e.m.f. of a Weston standard cell, one would use a/an
  • electrostatic voltmeter
  • hot-wire voltmeter
  • galvanometer
  • potentiometer
Q.41.Deflection sensitivity of deflecting plates of cathode ray tube __the distance between deflection pates.
  • is inversely proportional to
  • is directly proportional to
  • does not depend on
  • none of these
Q.42.Deflection sensitivity of deflecting plates of a cathode ray tube ____the accelerating anode (A3) voltage.
  • is inversely proportional to
  • is directly proportional to
  • does not depend on
  • none of these
Q.43.A moving –coil instrument can be used to measure
  • direct current
  • alternating current
  • both direct current and alternating current
  • none of these
Q.44.The frequency stability of a crystal oscillator depends upon
  • tuned circuit
  • crystal
  • crystal as well as the tuned circuit
  • none of these
Q.45.Hay bridge is usually used for measuring
  • resistance
  • capacitance
  • inductance
  • none of these
Q.46.Schering bridge is used for measuring
  • capacitance
  • inductance
  • frequency
  • none of these
Q.47.The Wien’s bridge is particularly useful for measuring frequencies of _______value.
  • low
  • very high
  • high
  • very low
Q.48. mpedance relay is used to protect
  • line within a particular zone
  • line beyond a particular zone
  • the whole transmission system
  • none of these
Q..49.Buchholz relay is used in ______ protection.
  • line
  • generator
  • transformer
  • none of these
Q.50. 1 GHz means 1000 Hz.
  • True
  • False
  • Partially True
  • None of these 
META TAGS:-BSNL JTO EXAM PAPERS I BSNL TTA ELECTRICAL SAMPLE PAPERS I BSNL TTA ELECTRICAL LAST 5 YEAR PAPERS I BSNL TTA LAST 5 YEAR PAPERS I BSNL JTO MODEL PAPERS I BSNL TTA ELECTRICAL SOLVED PAPERS I BSNL TTA ELECTRICAL PRACTICE PAPERS I DOWNLOAD BSNL TTA SAMPLE PAPERS I BSNL TTA ELECTRICAL EXAM PAPERS I DOWNLOAD BSNL TTA SAMPLE PAPERS I DOWNLOAD BSNL TTA LAST 10 YEAR EXAM PAPERS I BSNL TTA PRACTICE PAPERS I DOWNLOAD BSNL TTA STUDY MATERIALS I BSNL TTA REFERENCE BOOKS I BSNL TTA PRACTICE PAPERS I BSNL TTA ELECTRICAL PRACTICE PAPERS I BSNL TTA ELECTRICAL GUESSING PAPERS I BSNL TTA STUDY NOTES I BSNL TTA ELECTRICAL QUESTION PAPERS I BSNL TTA ELECTRICAL OLD EXAM PAPERS I DOWNLOAD BSNL ELECTRICAL ENGINEERING SAMPLE PAPERS I

Saturday, 18 May 2013

BSNL TTA EXAM PAPERS I BSNL TTA ELECTRICAL EXAM PAPERS I BSNL TTA QUESTION PAPERS I BSNL TTA ELECTRICAL STUDY MATERIALS I BSNL TTA ELECTRICAL SAMPLE PAPERS I BSNL TTA ELECTRICAL MODEL PAPERS I

BSNL TTA 

Question Paper-2007

Electrical Engineering

Q.1.In a D.C. generator, if the brushes are given a small amount of forward shift, the effect of armature is
  • Totally demagnetizing
  • Totally magnetizing
  • Partly demagnetizing and partly cross magnetizing
  • Totally cross magnetizing
Q.2.The air gap between stator and armature of an electric motor is kept as small as possible
  • To get a stronger magnetic field
  • To improve the air circulation
  • To reach the higher speed of rotation
  • To make the rotation easier.
Q.3.Two series motors are coupled. One motor runs as generator & other as motor.The friction losses of the two machines will be equal when
  • Both operates at same voltage
  • Both have same back emf
  • Both have same speed
  • both have same excitation
Q.4.Plugging of D.C. motor is normally executed by
  • Reversing the field polarity
  • Reversing the armature polarity
  • Reversing both the armature and field polarity
  • Connecting a resistance across the armature.
Q.5.Transformer oil transformer provides
  • Insulation and cooling
  • Cooling and lubrication
  • Lubrication and insulation
  • Insulation, cooling and lubrication
Q.6.Leakage fluxes of transformer may be minimized by
  • Reducing the magnetizing current to the minimum
  • Reducing the reluctance of the iron core to the minimum
  • Reducing the number of primary and secondary turn to the minimum
  • Sectionalizing and interleaving the primary and secondary windings
Q.7.Electric power is transformed upon one coil to other coil in a transformer
  • Electrically
  • Electro Magnetically
  • Magnetically
  • Physically
Q.8.The most suitable and economical connection for small high voltage transformer isa.
  • Star- Delta connection
  • Delta- Delta connection
  • Delta- Star connection
  • Star- Star connection
Q.9.An alternator is said to be over excited when it is operating at
  • Unity power factor
  • Leading power factor
  • Lagging power factor
  • Either lagging or leading power factor
Q.10.In an A.C. machine, the armature winding is kept stationary while the field winding is kept rotating for the following rason
  • Armature handles very large currents and high voltages
  • Armature friction involving deep slots to accommodate large coils is easy if armature is kept stationary
  • Ease of cooling the stator than rotor
  • None of the above.
Q.11.In a synchronous motor, the torque angle is the
  • Angle between the rotating stator flux and rotor poles
  • Angle between the magnetizing current and back emf
  • Angle between the supply voltage and back emf
  • None of the above
Q.12.A 3-phase synchronous motor is said to be "floating" when it operates
  • On no load and without loss
  • On constantly varying load
  • On pulsating load
  • On high load and variable supply voltage
Q.13.Speed of synchronous motor depends upon
  • Number of poles
  • Supply frequency
  • Both (a) and (b)
  • Neither (a) nor (b)
Q.14.Imbalance in the shaft of an induction motor occurs due to
  • Slip rings
  • Overheating of winding
  • Non uniform of air gap
  • Rigid construction
Q.15.Squirrel cage induction motor has
  • Zero starting torque
  • Very small starting torque
  • Medium starting torque
  • Very high starting torque
Q.16.The principle of operation of a 3-phase induction motor is similar to that of a
  • Synchronous motor
  • Repulsion - start induction motor
  • Transformer with a shorted secondary
  • Capacitor - start, induction - run motor
Q.17.The speed/load characteristics of a universal motor are similar to those
  • D.C. shunt motor
  • D.C. series motor
  • A.C. motor
  • None of the above
Q.18.Single phase A.C. motor generally used for vacuum cleaners is
  • Universal motor
  • Repulsion motor
  • Hysteresis motor
  • Reluctance motor
Q.19.Buchholz relay is used for the protection of
  • Switch yard
  • Transformers
  • Alternators
  • Transmission lines
Q.20.The type of braking used in traction system is
  • Mechanical braking
  • Electro - pneumatic braking
  • Vacuum braking system
  • All the above
Q.21.The function of processing zener diode in a UJT circuit used for triggering of SCRs is to
  • Expedite the generation of triggering pulses
  • Delay the generation of triggering pulses
  • Provide a constant voltage to UJT to prevent erratic firing
  • Provide a variable voltage to UJT as the source voltage changes
Q.22.The frequency of a ripple in the output voltage of a 3 - phase semi converter depends upon
  • Firing angle and load resistance
  • Firing angle and supply frequency
  • Firing angle and load inductance
  • Only on load circuit parameters
Q.23.The SCR is turned off when the anode currents falls below
  • Forward current rating
  • Break - over voltage
  • Holding current
  • Latching
Q.24.V-I characteristics of emitter of a UJT is
  • Similar to CE with linear and saturation region
  • Similar to FET with a linear and pinch of region
  • Similar to tunnel diode in some respects
  • Linear between the peak point and valley point
Q.25.A transformer works on
  • DC
  • AC
  • AC & DC both
  • Neither AC not DC
Q.26.Which of the following device is used in transformer?
  • Tube light
  • Electric heater
  • Mobile phone
  • Rectifier module
Q.27.Earth electrodes can be in the form of
  • rods or piper
  • stripes
  • plates
  • any of above
Q.28.Carbone or metal brushes are used in
  • DC generators only
  • AC generators only
  • Both AC & DC generation
  • None of above
Q.29.Energy is lost due to Joule's heating effects in winding of transformer. This is called
  • Copper loss
  • Eddy current loss
  • Flux loss
  • None
Q.30.In refrigeration cycle heat is lost in
  • Cooling coil
  • Condenser
  • Compressor
  • Expansion valve
Q.31.The power factor of AC circuit is
  • R/X
  • R/Z
  • Z/R
  • Zero
Q.32.Silicon controlled output is good if ripple factor is
  • Switch
  • Transformer
  • Amplifier
  • None of above
Q.33.The rectifier output is good if ripple factor is\
  • More
  • Less
  • Constant
  • None of above
Q.34.Protective relays can monitor large AC current by means of
  • Current transformer
  • Potential transformer
  • Micro transformer
  • None of above
Q.35.The combines AM of two similar batteries connected in parallel is:
  • halved
  • doubled
  • remain constant
  • none of above
Q.36.The current in circuit having 5 V EMI source and 10 Ohm resistance is:
  • 2 Amp
  • 50 Amp
  • 5 Amp
  • ½ Amp
Q.37.The chopper is a device to change
  • Voltage
  • Current
  • Frequency
  • None of these
Q.38.The power consumption, in case of centrifugal loads (like pump, fan, blower etc) is
proportional to:
  • speed
  • square of speed
  • cube of speed
  • none of these
Q.39.Which of these need to be measured after rewinding the motor:
  • no load current
  • air gap
  • winding resistance
  • all of the above
Q.40.Five percent increase in supply frequency will change the synchronous speed of motor by:
  • -5%
  • +5%
  • -10%
  • +10%
Q.41.Which of the following is the best inverter?
  • square wave inverter
  • sine wave inverter
  • pure sine wave inverter
  • triangular wave inverter
Q.42.For driving a motor in a tape recorder or record player, the motor used is generally:
  • a synchronous motor
  • a hydraulic motor
  • an induction motor
  • a dc series motor
Q.43.The DC motor starter used with a constant speed shunt motor is:
  • 2 point starter
  • 3 point starter
  • 4 point starter
  • 5 point starter
Q.44.A commutator in a DC motor converts
  • AC to DC
  • DC to AC
  • Both AC to DC and DC to AC
  • None of these
Q.45.Two transformers running in parallel will share the load according to their:
  • leakage reactance
  • pu impedance
  • efficiency
  • rating
Q.46.The size of the Earth Wire is determined by:
  • the ampere capacity of the service wires
  • the atmospheric conditions
  • the voltage of service wires
  • none of these
Q.47.The function of lightning arrester is:
  • to limit the short circuit fault current
  • to provide path to high voltage surge to earth
  • to reduce arcing
  • none of these
Q.48.Surge protector provide:
  • high impedance to normal voltage
  • low impedance to surge
  • both (a) and (b)
  • none of these
Q.49.Earthing is necessary to give protection against
  • voltage fluctuation
  • overloading
  • danger of electric shock
  • high temperature of conductors
Q.50.The primary function of fuse is to
  • protect the appliance
  • open the circuit
  • prevent excessive current
  • protect the line
META TAGS:-BSNL TTA SOLVED EXAM PAPERS I BSNL TTA SAMPLE PAPERS I BSNL TTA MODEL PAPERS I BSNL TTA PRACTICE EXAM PAPERS I BSNL TTA QUESTION PAPERS I BSNL TTA LAST 5 YEAR EXAM PAPERS I  BSNL TTA MODEL PAPERS I BSNL TTA MODEL EXAM PAPERS I BSNL TTA ELECTRICAL STUDY MATERIALS I BSNL TTA ELECTRICAL MODEL TEST PAPERS I BSNL JTO ELECTRICAL QUESTIONS I BSNL JTO BASIC ELECTRICAL EXAM PAPERS I BSNL TTA BASIC ELECTRICAL IMPORTANT QUESTIONS I BSNL TTA EXAM PAPERS IN PDF I DOWNLOAD BSNL TTA ELECTRICAL STUDY MATERIALS I BSNL TTA LAST 5 YEARS ELECTRICAL PAPERS I BSNL TTA ELECTRICAL ALST 5 YEAR PAPERS I