BHARAT SANCHAR NIGAM LIMITED
Telecom Technical Assistant
Network & Transmission Line Model Paper
Q.1.Pick up wrong statement
- A group of interconnected individual components known as circuit elements is called a network.
- A humped network is an arrangement of physically separate resistors, inductors and capacitors.
- Distributed network is one, which the resistive, inductive and capacitive effects are inseparable for network analyses.
- A branch is a network having four elements.
Q.2.Kirchoff's laws for networks are:
- The algebraic sum of branch currents meeting at any node is zero.
- The algebric sum of voltage drops in any set of branches forming a closed circuit or loop must be equal to zero.
- Both (a) and (b)
- Neither (a) and (b)
Q.3.Mutually coupled circuit is a circuit which is:
- Bilateral
- Unilateral
- None of these
- Either (a) or (b)
Q.4.Duality is a
- Transformation in which current and voltages are interchanged
- Active sources become passive sources
- Passive sources become active sources
- Both (b) and (c)
Q.5.Combined inductance of two inductors L1 and L2 connected & voltages are interchanged
- L1 + L2
- (L1 + L2)/ L1
- (L1 + L2) / (L1.L2)
- (L1.L2) / (L1 + L2)
Q.6.Normal analysis techniques are based on
- Thevenin's theorem
- Tellegan's theorem
- Superposition theorem
- Kirchoff's Law
Q.7.Two voltage sources can be connected in parallel when they are equal in
- Magnitude
- Frequency
- Phase
- All the above
Q.8.The kirchoff's law fail in
- Linear circuits
- Non-linear circuits
- Lumped parameter circuits
- Distributed parameter circuits
Q.9.Which of the following is a nonreciprocal network ?
- A network consisting of all resistances
- A network consisting of all capacitance
- A network consisting of all inductance
- A transistor model
Q.10.When two systems obey equations of the same form the systems are said to be
- Similar system
- Identical system
- Analogous system
- Digital system
Q.11.For a highly selective circuit
- It must have large value of Q
- It must have high value of capacitance to produce resonance at fixed frequency
- Either (a) or (b)
- Neither (a) nor (b)
Q.12.A network consisting of four terminals is called a
- One port network
- Two port network
- Four port network
- None of the above
Q.13.Driving point of a network is
- A port where voltage or current source is connected
- A terminal where load is connected
- A port where load is connected
- None of the above
Q.14.Ceramic filters are similar in construction to
- Crystal filters
- Crystal ladder filters
- Crystal lattice
- Mechanical filters
Q.15.When two port networks are connected in parallel the resultant
- Z parameters are the some of individual parameters
- Y- parameters are the some of individual parameters
- Both (a) and (b)
- Neither (a) nor (b)
Q.16.Electric wave filters
- Allow electric signals with specified frequency range
- Suppress signals outside a specified range
- Both (a) and (b) occurs simultaneously
- Either (a) or (b) occur at a time
Q.17.A cascade connection of low pass filter and high pass filter is called
- Band pass filter
- Band elimination filter
- Neither (a) nor (b)
- Both (a) and (b)
Q.18.The response of a network is decided by the location of
- Its poles
- Its zeros
- Either (a) nor (b)
- Both (a) and (b)
Q.19.Example of two port network is
- Transformer
- Transmission line
- Bridge circuit and transistor circuit
- All of the above
Q.20.The circuit whose properties are same in either direction is called
- Universal circuit
- Reversible circuit
- Unilateral circuit
- Bilateral circuit
Q.21.Distortion in transmission line is due to
- Delay distortion
- Phase distortion
- Frequency distortion
- All the above
Q.22.The general parameters distributed along a transmission line are
- R&L only
- L&C only
- C&G only
- R, L, C&G
Q.23.Phase distortion is prominently caused by
- circuit transients
- non linear characteristics
- linearity
- none
Q.24.The voltage or current from the receiving end towards the sending end, decreasing in
amplitude with increasing distance from the load is called
- incident wave
- medium wave
- reflected wave
- none of above
Q.25.E.M. Waves of UHF is propagated efficiently via
- parallel wire transmission lines
- open wire transmission lines
- wave guides
- coaxial cables
Q.26.Norton theorem is valid for network containing only
- linear elements
- no linear elements
- resistance
- reactance
Q.27.The maximum power is absorbed by one network from other, joined to it at two terminals
when the impedance of one is
- complex conjugate of other
- square root of other
- same as other
- (d) none of above
Q.28.The decrease in effective conductor cross section at high frequencies
- decrease the conductor resistance
- increase the conductor resistance
- no change in conductor resistance
- none of above
Q.29.Voltage standing wave ratio lies in the range
- 0 to 1
- 1 to infinity
- 0 to infinity
- -1 to +1
Q.30.Attenuators have applications
- in AC circuits only
- in DC circuits only
- in AC as well DC circuits
- in low frequency circuits only
Q.31.In an network
- the number of tree branches is equal to the number of links
- the number of tree branches cannot be equal to the number of links
- the number of tree branches has no relation with the number of links branches
- none of these
Q.32.In open line transmission systems, attenuation is more at
- lower frequencies
- medium frequencies
- higher frequencies
- remains constant
Q.33.a power ratio 100 is equivalent to
- 10 dB
- 20 dB
- 50 dB
- 100 dB
Q.34.The velocity factor for small widely spaced conductors such as open wire line in air is very
nearly
- 0.66
- 0.98
- 0.82
- 0.76
Q.35.Transmission of power to a load over a transmission line achieves optimum value when
standing wave ratio (SWR) becomes
- 2 : 1
- 1 : 2
- 1 : 1
- 1 : 10
Q.36.The VSWR in a short circuited loss less transmission line equals
- infinity
- unity
- zero
- none of above
Q.37.The velocity factor of a transmission line
- is always greater than unity
- depend upon the permittivity of the surrounding medium
- is lease for air medium
- is governed by skin effect
Q.38.Which of the following is not correct
- voltage source is an active element
- current source is a passive element
- resistance is a passive element
- conductance is a passive element
Q.39.A network is said to be nonlinear if it does not satisfy
- superposition condition
- homogeneity condition
- both superposition and homogeneity conditions
- associative condition
Q.40.An capacitor with zero initial condition at t = 0+ act as a
- short circuit
- open circuit
- current source
- voltage source
Q.41.An inductor stores energy in
- electrostatic field
- electromagnetic field
- magnetic field
- core
Q.42.In series LCR circuits, at resonance,
- current is maximum, power factor is zero
- current is maximum, power factor is unity
- current is minimum, power factor is unity
- none of above
Q.43.In an RCL series circuit, during resonance, the impedance will be
- zero
- minimum
- maximum
- none of above
Q.44.When a source is delivering maximum power to load, the efficiency of the circuit is always
- 50%
- 75%
- 100%
- None of above
Q.45.In a linear network, when the ac input is doubled, the ac output becomes
- two times
- four times
- half
- one forth
Q.46.A passive network has
- current sources but no voltage sources
- voltage sources but no current sources
- both current and voltage sources
- no voltage or current sources
Q.47.Two resistances are connected in parallel and each dissipates 50 waits. The total power
supplied by the source is
- 25 watts
- 50 watts
- 100 watts
- 200 watts
Q.48.Three bulbs of 60 watts each are connected is parallel across 220v, 50 Hz supply. If one bulb burns out
- only remaining two will operate
- remaining two will not operate
- all of three will operate
- there will be heavy current from the supply
Q.49.The amplitude of an audio signal is 10 & that of carrier wave is 50.Percentage modulation
is:
- 0.2
- 20
- 5
- 60
Q.50.The main advantage of PCM system is:
- lower bandwidth
- lower power
- lower noise
- lower time
META TAGS:-TTA STUDY MATERIALS I TTA INSTRUMENTATION ENGINEERING EXAM PAPERS I TTA LST 5 YEAR EXAM PAPERS I TTA PREVIOUS YEAR EXAM PAPERS I TTA OLD EXAM PAPERS I TTA GUESSING PAPERS I TTA QUESTION PAPERS I TTA LAST 10 YEAR EXAM PAPERS I TTA SAMPLE PAPERS I TTA LAST YEAR QUESTION PAPERS I TTA STUDY MATERIALS I DOWNLOAD TTA STUDY NOTES I TTA ELECTRONICS STUDY MATERIALS I ELECTRONICS AND COMMUNICATION STUDY MATERIALS I BSNL JTO EXAM PAPERS I BSNL LAST 5 YEAR EXAM PAPERS I DOWNLOAD BSNL JAO EXAM PAPERS I MTNL EXAM PAPERS I TTA OLD PAPERS I BSNL TTA GUESSING PAPERS I TTA GUESS EXAM PAPERS I TTA COMMUNICATION ENGINEERING EXAM PAPERS I TTA CONTROL SYSTEM QUESTIONS I TTA TRANSMISSION LINE QUESTION PAPERS I